Easy DIY · 재봉 도구 관리

OLFA rotary cutting mat care: clean gently and store flat

Remove embedded fibres with a lint roller or art-gum eraser, vary where you cut, and store rotary cutting mats flat away from sunlight and ironing heat.

AI-edited · Human admin approved

Wikimedia Commons · Lenore Edman / Wikimedia Commons, CC BY 2.0 (original unmodified; Flickr photo reviewed by FlickreviewR) · CC BY 2.0 ↗

Rotary cutting mats protect the work surface, but repeated cuts in one spot and exposure to heat can shorten their useful life. These steps follow OLFA North America's official mat-care guidance; consult your own brand's instructions for other materials.

Your try-it-at-home checklist

0 / 6 done

1. Retract or safely cover the rotary blade and put it away. Clear pins, needles, and fabric scraps from the mat before cleaning.
2. For general dirt, use a soft, lightly damp cloth with mild detergent. Apply cleaner to the cloth rather than spraying it on the mat.
3. Lift trapped lint and threads from cut grooves using a lint roller, sticky tape, or a soft art-gum eraser.
4. Move your cutting lines around instead of repeatedly cutting in the same spot; deep grooves can interfere with the self-healing surface.
5. Never use the mat as an ironing surface. Keep it out of hot or cold cars and direct sunlight.
6. Store the mat completely flat, such as under a bed or table. Once a mat has warped, it generally cannot be flattened again.

Your try-it-at-home checklist

Further reading

You may also like

Six checks before using a stepladder at home

Insulate accessible hot-water pipes in six steps

Apply IKEA TRIXIG Felt Floor Protectors in Six Steps