Easy DIY · 욕실 설치

IKEA BOTAREN tension rod: 70–120 cm, no drilling, check the grip

The IKEA BOTAREN 70–120 cm rod (903.060.20) uses a spring mechanism without screws. Measure the opening, check that both ends grip, and clean with a mild cleaner on a damp cloth followed by drying.

AI-edited · Human admin approved

IKEA

Text-only card to IKEA's BOTAREN 70–120 cm installation and care page.

Link card to IKEA's BOTAREN 70–120 cm product page

Open source ↗

BOTAREN comes in different lengths; do not confuse 70–120 cm with 120–200 cm. IKEA's Korean product page for 903.060.20 confirms spring-mounted, screw-free installation and mild-cleaner wiping followed by a dry cloth. It is not a general-purpose structural support rod.

Your try-it-at-home checklist

0 / 6 done

Check your BOTAREN package model number. These instructions are for the 70–120 cm version, 903.060.20.
Measure the distance between the mounting walls and confirm that it falls within 70–120 cm. Other models have different spans.
Check that both contact surfaces are sound and stable; remove dust and moisture. Avoid mounting on slick, unstable surfaces.
Follow IKEA's assembly sheet to engage the spring tension and position the rod. It installs without screws or drilling.
Before hanging a shower curtain, check that both ends are seated and the rod is level; test the grip gently. Never hang from the rod or load it with heavy objects.
For cleaning, wipe with a damp cloth and a small amount of mild cleaner, then dry with a clean cloth. If it loosens, unload the rod and inspect the installation again.

Text-only card to IKEA's BOTAREN 70–120 cm installation and care page.

Your try-it-at-home checklist

Further reading

You may also like

Six checks before using a stepladder at home

Insulate accessible hot-water pipes in six steps

Apply IKEA TRIXIG Felt Floor Protectors in Six Steps