Easy DIY · 무타공 벽걸이

3M Command clear hooks: clean with rubbing alcohol, wait 1 hour

For Command clear hooks, prepare a suitable surface with rubbing alcohol, press the adhesive as directed and wait one hour before use. To remove, slowly stretch the tab straight down along the wall—not outward.

AI-edited · Human admin approved

3M Command

Text-only link card to 3M's official clear-hook installation and removal guide.

Link to the official 3M Command clear-hook guide

Open source ↗

3M's clear-hook instructions specify isopropyl rubbing alcohol rather than household sprays or water. These hooks are not appropriate for every wall, especially wallpaper, recently painted surfaces or positions over a bed or valuable object. Follow the exact package if you own a different Command product.

Your try-it-at-home checklist

0 / 6 done

Check the product's surface compatibility. Avoid wallpaper, weak paint, locations over beds or valuables; wait at least seven days after painting.
Gently wipe the mounting spot with isopropyl rubbing alcohol and let dry. Do not substitute general-purpose cleaner, wet wipes or water.
For clear hooks, remove the black liner, attach the strip to the wall and press the entire strip firmly for about 30 seconds.
Peel off the blue liner, align the clear hook and press it firmly for another 30 seconds. Follow your specific pack's assembly order.
Wait one hour before hanging anything. Respect the hook's marked load limit and avoid fragile or irreplaceable items.
For removal, support the hook and slowly stretch the adhesive tab straight down parallel to the wall. Never yank it outward.

Text-only link card to 3M's official clear-hook installation and removal guide.

Your try-it-at-home checklist

Further reading

You may also like

Six checks before using a stepladder at home

Insulate accessible hot-water pipes in six steps

Apply IKEA TRIXIG Felt Floor Protectors in Six Steps