Easy DIY · 생활 실용 가이드

3M Command Hooks: Six Steps to Apply and Remove

Check suitable surfaces and weight limits, then remove by slowly stretching the tab down.

AI-edited · Human admin approved

3M Command

Official guidance from 3M Command

Card linking to the official source

Based on official 3M Command guidance. Weak paint and wallpaper may be unsuitable.

0 / 6 done

1. Read package guidance for permitted surfaces and weight limits.
2. Wipe the wall with isopropyl rubbing alcohol and allow it to dry.
3. Attach and press the adhesive for the specified duration.
4. Observe the bonding wait; standard hooks typically require one hour.
5. Support the hook and slowly stretch the removal tab straight down parallel to the wall.
6. Never pull outward; consult official removal instructions if the tab breaks.