Easy DIY · 벽 손상 줄이는 수납

3M Command Clear Hooks: 6 Steps to Apply and Remove Safely

Clean the compatible surface with rubbing alcohol, press the strip and hook for 30 seconds each, and wait one hour. For removal, stretch the strip straight down along the wall.

AI-edited · Human admin approved

3M Command

Link to 3M's official Command Clear Hook application and removal guide; no manufacturer image or video was copied.

Link card opening 3M's official Clear Hook guide

Open source ↗

This practical guide follows 3M's official Clear Hook instructions. Apply only to a smooth, compatible surface listed for your exact product. Paint, wallpaper, texture and surface condition can affect damage risk; weight limits differ by hook. Use a small amount of rubbing alcohol with ventilation and away from flames. Always follow the package for your model.

Your try-it-at-home checklist

0 / 6 done

1. Check product and wall — Confirm the Clear Hook and matching adhesive strip, and choose a smooth surface approved for that model. Avoid fragile paint, wallpaper or rough finishes, and never exceed the package's stated load rating.
2. Clean and dry — Following 3M, gently wipe the surface with a little isopropyl rubbing alcohol on a cloth and let it dry completely. Do not substitute household cleaning sprays or wipes that can leave residue. Ventilate and keep away from flames.
3. Peel the black liner — Remove the black backing, place the strip against the wall in the indicated orientation, and press the entire strip firmly for 30 seconds.
4. Peel the blue liner — Remove the blue backing, attach the hook to the strip, and press firmly for another 30 seconds. Do not hang anything immediately.
5. Wait one hour — Allow at least one hour before hanging a lightweight item within the exact product's weight limit. Never use a hook where a child may pull or a person may hang from it.
6. Stretch down to remove — Gently support the hook and pull the exposed tab slowly straight downward along the wall, stretching it at least 12 inches (about 30 cm). Never pull outward. If the strip tears or paint starts lifting, stop and consult 3M's guidance.

Link to 3M's official Command Clear Hook application and removal guide; no manufacturer image or video was copied.

Your try-it-at-home checklist

Further reading

You may also like

Six checks before using a stepladder at home

Insulate accessible hot-water pipes in six steps

Apply IKEA TRIXIG Felt Floor Protectors in Six Steps