Housekeeping · 텀블러 관리

YETI MagSlider lid: remove the magnet and gasket for a proper clean

The YETI Rambler MagSlider lid has a removable slider magnet and gasket, both suitable for handwashing or dishwashing under YETI's directions. Dry fully and reinstall the gasket correctly.

AI-edited · Human admin approved

Wikimedia Commons · Corn cheese / CC BY-SA 4.0 / Wikimedia Commons, https://commons.wikimedia.org/wiki/File:16oz_travel_mug.jpg ; unmodified file · Creative Commons Attribution-ShareAlike 4.0 International ↗

Residue can hide in tumbler lid gasket grooves. YETI's official guidance explains removing and cleaning the MagSlider magnet and gasket, then fully drying before reassembly. StrongHold, Chug Cap and other YETI lids have different instructions, so identify the lid first.

Your try-it-at-home checklist

0 / 6 done

Confirm the lid is a Rambler MagSlider, empty the drink and let it cool. Do not dismantle it while hot liquid remains.
Gently pop the MagSlider magnet off the lid. Keep the small part away from drains and young children.
Pinch both sides of the gasket with two fingers and lift it out of its groove. Do not gouge it with a knife or sharp tool.
Following YETI's instructions, handwash the lid, magnet and gasket with mild dish soap, or place the removable pieces in the dishwasher's utensil compartment where specified.
Rinse the parts and gasket groove well and dry everything fully. Avoid storing the closed lid while damp.
Reinstall the gasket with its larger blade above the smaller blade, refit the slider and check seating and movement. A MagSlider is splash-resistant, not fully leakproof; do not carry it sideways in a bag.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination