Housekeeping · Washer leveling

Washing machine shaking during spin? Check the leveling feet

Check uneven laundry loads, all four feet, locking nuts and shipping bolts on newly installed washers.

AI-edited · Human admin approved

Wikimedia Commons · Gb.select / Wikimedia Commons, CC BY-SA 4.0 (original photograph; no modification). · CC BY-SA 4.0 ↗

A noisy spin cycle does not automatically mean the washer is broken. LG identifies uneven laundry distribution, flooring stability, feet and locknuts, and shipping bolts on new installations as common checks. Never tilt a heavy washer alone or crush its hoses.

Your try-it-at-home checklist

0 / 6 done

Stop the cycle if the washer is moving violently or striking surrounding cabinets.
Pause and redistribute bulky or tangled laundry; stay within the manufacturer's load guidance.
With the machine turned off, gently check for rocking by pressing opposite top corners. Confirm the floor is firm, clean and dry.
Use a level and adjust the feet according to the manual so all four rest solidly on the floor; tighten the locknuts and avoid overextending the legs.
For a newly installed front loader, verify shipping bolts were removed as directed. Have an installer help if the heavy appliance must be moved.
Run a manufacturer-recommended test with a modest load. Stop using the machine and seek service if severe vibration, scraping or movement continues.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination