Housekeeping · 가전 관리

Iron soleplate stained? Skip vinegar and abrasive pads

Never scrape a hot iron soleplate. For specified Philips models, unplug, cool, and wipe with a damp cloth; vinegar, scouring pads and metal tools are not recommended.

AI-edited · Human admin approved

Wikimedia Commons · Colin / CC BY-SA 3.0 / Wikimedia Commons https://commons.wikimedia.org/wiki/File:Electric_steam_iron.jpg / unmodified original · Creative Commons Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) ↗

Soleplate coatings differ. Philips advises unplugging, complete cooling and gentle wiping for the specified iron; it warns against metal objects and vinegar. Always follow the directions for your particular model.

Your try-it-at-home checklist

0 / 6 done

Switch the iron off and unplug it. If recently used, leave it upright on a stable heat-resistant surface.
Wait until the soleplate is completely cool; do not test its temperature with your fingers.
Check the material and cleaning instructions for your model. Philips specifies a soft cloth lightly dampened with water for the models in its guidance.
Gently wipe the residue away. Avoid sharp metal objects, steel wool and abrasive pads that could scratch the coating.
For the cited Philips models, do not apply vinegar or chemical cleaners to the soleplate. Never rinse the whole iron under a tap or submerge it.
Wipe away remaining moisture and let the iron dry. If coating is peeling or stubborn scorching remains, contact the maker rather than escalating to harsh cleaning.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination