Living items · Mixer attachment care

Stand-mixer beaters: check the material before using a dishwasher

Uncoated aluminum beaters generally need prompt hand-washing and drying; coated parts and whisks vary by model.

AI-edited · Human admin approved

Wikimedia Commons · g2boojum / Wikimedia Commons / CC BY-SA 2.0. Original photograph, not modified. · CC BY-SA 2.0 ↗

Stand-mixer accessories can look alike but have different coatings and cleaning requirements. KitchenAid says burnished, uncoated aluminum beaters can oxidize and leave gray residue after dishwasher cycles; some coated beaters are dishwasher-safe. Check your exact part and mixer model rather than assuming every accessory can go in together.

Your try-it-at-home checklist

0 / 6 done

Turn the mixer off, unplug it and wait for all moving parts to stop.
Remove the flat beater, dough hook and wire whisk, then read the material and care instructions for each attachment.
Hand-wash burnished, uncoated aluminum accessories in warm soapy water with a soft cloth; do not put them in a dishwasher.
Some coated beaters and bowls can be dishwasher-safe, but wire whisks and other attachments vary; follow the model manual.
Rinse uncoated aluminum pieces thoroughly and towel-dry them immediately to reduce oxidation and gray residue.
Wipe the motor body with a lightly damp cloth without immersing it; let everything dry, and replace heavily corroded or flaking accessories.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to clean, air-dry and store Hunter rubber rain boots

Six steps for safe Anker power-bank storage and charging

Six steps to clean, condition and store a Coach leather bag