Living items · 소형 주방가전 관리

Clean a nutribullet in 6 steps: hand-wash the blade, never soak the motor

Follow nutribullet's official guidance to clean the cup, blade, fixed gasket and motor base separately, with model-specific dishwasher and sealed-cup heat precautions.

AI-edited · Human admin approved

Wikimedia Commons · Didriks / Wikimedia Commons / CC BY 2.0 (unchanged) · Creative Commons Attribution 2.0 Generic ↗

Cleaning soon after blending keeps residue from drying onto the cup and blade. The steps below follow nutribullet's guidance for personal blenders. The motor base is electrical equipment and must never be immersed; blades are sharp. Confirm dishwasher compatibility in your exact model's instructions.

Your try-it-at-home checklist

0 / 6 done

1. Stop the blender, unplug the motor base and detach the cup and blade assembly. Never blend hot ingredients or carbonated drinks in a sealed personal blender cup; pressure can build up and cause injury.
2. Empty the cup and rinse it promptly. Removing residue before it dries reduces the need for heavy scrubbing.
3. Hand-wash the blade assembly with warm soapy water and a soft brush. Avoid contact with sharp blade edges. Do not pull out the blade's rubber gasket; doing so can weaken the seal.
4. Wash the cup and lid with mild dish soap, then rinse thoroughly. Some cups and accessories are top-rack dishwasher safe, but follow your particular model's instructions for every part, especially the blade.
5. Never pour water into or immerse the motor base. With the plug removed, wipe the housing and surrounding contact surfaces with a slightly damp cloth, preventing liquid entering openings.
6. Dry every part fully and inspect the gasket for loosening, distortion or leaks. If the gasket becomes dislodged or the blade unit is damaged, consult the manufacturer about genuine replacement instead of improvising a repair.

nutribulletHow to Clean nutribullet & magic bullet Blade, Base and Cups ↗Manufacturer guide: power off/unplug; rinse promptly; hand-wash blades; never remove gasket; wipe unplugged motor base without immersion. Model-dependent dishwasher guidance.nutribulletHow to Clean a Blender the Right Way ↗Manufacturer article confirms motor base never immersed, deep-clean care for gasket, air drying, sharp blade and severe pressure hazards when using heated contents in sealed personal blender cups.nutribulletHow To Clean and Replace nutribullet Blades & Gaskets ↗Manufacturer specifically warns not to remove blade gasket and recommends replacement blade assembly if gasket becomes loose or dislodged.Wikimedia CommonsVitamix Blender.jpg — file and CC BY 2.0 credit ↗Photo by Didriks, FlickreviewR license confirmed CC BY 2.0. Actual photographed appliance is Vitamix, not nutribullet; caption explicitly distinguishes.Wikimedia CommonsCommons: Reusing content outside Wikimedia — technical ↗Wikimedia server allows hotlinking while retaining file-specific credit obligations; original upload.wikimedia.org image opened successfully.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to clean, air-dry and store Hunter rubber rain boots

Six steps for safe Anker power-bank storage and charging

Six steps to clean, condition and store a Coach leather bag