Living items · 커피머신 관리

Nespresso Vertuo Pop: empty capsule bin and drip tray before the cleaning cycle

Follow the official Vertuo Pop routine: eject the capsule, rinse removable trays, place a one-litre container, then press the button three times within two seconds to run the water cleaning cycle.

AI-edited · Human admin approved

Wikimedia Commons · Tifa Zabat (PumpkinHusky) / Wikimedia Commons / CC BY-SA 4.0 (real Vertuo Pop illustrative photograph) · CC BY-SA 4.0 ↗

When water or used capsules collect around the machine, start by emptying the removable containers. Nespresso's official Vertuo Pop support separates routine water cleaning from descaling. The button sequence below is specific to Vertuo Pop and should not be assumed to work on other Vertuo or Original machines.

Your try-it-at-home checklist

0 / 6 done

Make sure the machine can be handled safely. Open the head and eject any used capsule; the cleaning cycle must run without a capsule.
Rinse the water tank and lid and refill with fresh drinking water. Empty and rinse the cup support, used-capsule container and drip tray.
Place a stable container holding at least one litre below the coffee outlet. Close and lock the machine head.
Wait until the ready light is steady. On a Vertuo Pop, press the button three times within two seconds to start cleaning.
Allow the automatic cleaning cycle, about seven minutes, to complete without opening the head. Keep hands clear of the hot-water outlet and container.
Once the light is steady, safely discard the collected water and tidy the trays. Do not immerse the machine, put it in a dishwasher or use harsh or abrasive products.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to clean, air-dry and store Hunter rubber rain boots

Six steps for safe Anker power-bank storage and charging

Six steps to clean, condition and store a Coach leather bag