Organization · 책상 케이블 정리

IKEA SIGNUM Cable Tray: 6 Steps for Tidy, Safer Desks

Route desk cables with the 70 cm tray, never mount it on glass and avoid cable pinching and heat.

AI-edited · Human admin approved

IKEA

Official IKEA SIGNUM product and care details

Link card to the manufacturer's official guidance

This guide is specific to the powder-coated steel IKEA SIGNUM 102.002.54, rated for a maximum load of 10 kg. It is not an electrical repair guide.

0 / 6 done

1. Clear the space beneath the desk, turn equipment off and unplug it before sorting cables.
2. Never mount to a glass tabletop. For other surfaces, verify the thickness and fixing points in the manual; seek help if unsure.
3. Fix the 70 cm tray using the specified hardware, check for wobble, and keep the load at or below 10 kg.
4. Route power and data cords without tight bends, crushing or contact with sharp metal edges.
5. Leave ventilation around power adapters rather than stacking heat-producing devices. Retire damaged cables.
6. Wipe the metal tray with a cloth dampened in mild soapy water, then wipe dry. Keep liquid off connectors.