Housekeeping · 욕실·거울 관리

Clean a Mirror Without Scratching: 6 Steps for IKEA LETTAN

For IKEA LETTAN 605.564.02, the official care guide calls for a soft cloth dampened with water and, if needed, mild non-abrasive dish soap. Follow six simple steps.

AI-edited · Human admin approved

IKEA Korea

Official LETTAN 605.564.02 care-page link; no unlicensed product photo is attached.

Image-free link card to the official product information.

Open source ↗

A streaky mirror rarely needs a harsh cleaner. First check the care label for the specific model. This guide follows IKEA LETTAN 605.564.02, not a universal warranty instruction for every mirror.

Your try-it-at-home checklist

0 / 6 done

1. Identify the product and check its care information first. These instructions refer to the non-electrical IKEA LETTAN 605.564.02; illuminated mirrors require their own manual.
2. Lift loose dust with a clean, soft cloth. Avoid rubbing gritty particles across the surface, which may scratch the glass.
3. Lightly dampen a soft cloth with water and wipe the mirror. Do not saturate the cloth or allow water to pool along the edges or behind the mirror.
4. For stubborn marks, follow the product instructions: use a little mild, non-abrasive dish detergent or soap on a soft damp cloth. Avoid abrasive pads.
5. Finish gently, then dry with a clean cloth so moisture and residues do not remain. Do not leave wet cloths resting on edges or the frame.
6. If the glass is cracked or the wall fixing seems loose, stop cleaning and seek safe repair advice. Mounting hardware must be suitable for the wall material.

Official LETTAN 605.564.02 care-page link; no unlicensed product photo is attached.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination