Organization · 책상 전선 정리

Set Up an IKEA FÖRSÄSONG Cable Tray in Six Steps

Check desk thickness of 1.2–4 cm and the 3 kg load limit before clamping and bundling desk cables.

AI-edited · Human admin approved

IKEA Korea

Original IKEA FÖRSÄSONG cable tray product page.미리보기 이미지는 검증하지 않았습니다.

Link card to IKEA FÖRSÄSONG product page

This guide is for IKEA product 406.364.24. Organizing cords does not increase a power strip's electrical capacity; keep cords ventilated and within ratings.

Your try-it-at-home checklist

0 / 6 done

Measure the desk edge to confirm it fits the specified 1.2–4 cm clamp range.
Check the combined weight of adapters and accessories stays within the 3 kg maximum load.
Inspect cable insulation and signs of overheating before reorganizing plugs in the work area.
Clamp the tray to the desk following the manufacturer's assembly guide, then tighten it level and securely.
Use the two included hook-and-loop straps loosely without pinching or sharply bending cords; allow ventilation.
Check stability, keep the tray away from moisture and heat, and wipe with a mild soapy solution and dry as advised.

Original IKEA FÖRSÄSONG cable tray product page.미리보기 이미지는 검증하지 않았습니다.

Your try-it-at-home checklist

Further reading

You may also like

Preserve family letters and paper records in six steps

Store household chemicals more safely in six steps

Six steps to store a sleeping bag without long-term compression