Organization · 전기 코드 안전 정리

Six steps to safer desk power-cord routing: avoid rugs and pinching

Never hide power cords under rugs or pinch them beneath furniture. Extension cords are temporary, not substitutes for fixed wiring.

AI-edited · Human admin approved

Electrical Safety Foundation International

ESFI original extension-cord safety tips

Link card to the original guidance

Open source ↗

A tidy workstation should not introduce overheating, crushing or trip hazards. This guide applies Electrical Safety Foundation International recommendations.

Your try-it-at-home checklist

0 / 6 done

1. Identify connected devices, switch them off and unplug by the plug body. Stop using any cord that is frayed or becomes hot.
2. Plan separate routes for power and signal cables, keeping power cords away from foot traffic.
3. Do not run cords beneath rugs, through doorways or inside walls and ceilings. Avoid pressure from furniture legs or casters.
4. Never nail or staple cables. Use suitable cable holders without pinching the insulation, following their instructions.
5. Do not daisy-chain power strips. Temporary extension cords must be rated for the connected load; ask an electrician about insufficient fixed outlets.
6. Recheck for compression, heat and trips. Replace damaged cords safely instead of attempting a tape-only repair.

ESFI original extension-cord safety tips

Your try-it-at-home checklist

Further reading

You may also like

Preserve family letters and paper records in six steps

Store household chemicals more safely in six steps

Six steps to store a sleeping bag without long-term compression