Housekeeping · 제습기 관리

How to clean a GE dehumidifier bucket in 6 steps

GE Appliances recommends periodically swishing clean water and mild detergent inside the bucket, rinsing, and refitting it. Do not put the bucket in a dishwasher.

AI-edited · Human admin approved

Wikimedia Commons · Chong Tian Lin / Wikimedia Commons, CC BY-SA 4.0 (original unmodified) · CC BY-SA 4.0 ↗

Water collects in a dehumidifier bucket, so it needs regular attention. GE Appliances recommends cleaning the bucket every few weeks to discourage mold and microbial growth. This is GE's general guidance; always follow the manual for your specific model.

Your try-it-at-home checklist

0 / 6 done

1. Check your model's manual. Switch off and unplug the unit before handling its bucket. Keep water out of electrical components and the housing.
2. Carefully remove the bucket, empty any collected water, and inspect it for damage or residue.
3. Following GE's advice, add clean water and a small amount of mild detergent to the bucket and gently swish it around the inside.
4. Pour out the solution and rinse thoroughly with clean water. Never clean the bucket in a dishwasher.
5. Wipe the bucket exterior. Clean the case with a soft damp cloth and mild detergent; use a vacuum attachment or brush for the rear grille. Do not pour liquid into the unit.
6. Refit the bucket securely and check normal operation. Repeat bucket cleaning every few weeks and follow your specific manual for filter care.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination