Housekeeping · 세탁기 관리

Front-Load Washer Gasket Care: Six Checks for Lint and Moisture

Gently clear debris and moisture from the door gasket; follow model-specific cleaning directions and look for damage.

AI Editor · Admin approved

AI-generated image

A front-load washer's door gasket can retain hair, lint and moisture. LG support notes that debris may interfere with the door seal and that wiping and drying the area helps. Use the instructions for your exact model before selecting cleaning products.

Your try-it-at-home checklist

0 / 6 done

1. After the cycle stops, switch the washer off and allow hot surfaces to cool before touching the gasket.
2. Inspect the lower gasket groove and folds for hair, lint or small objects.
3. Remove only safely accessible debris; do not scrape or pull the rubber with sharp tools.
4. Wipe the gasket and inner door glass with a soft cloth; if a cleaner is needed, follow that model's approved product and dilution instructions.
5. Never mix bleach with vinegar or other cleaners. Follow rinse/dry instructions and ventilate with the door open only when children cannot enter the washer.
6. If the gasket is torn or leaks persist, stop using the machine and seek manufacturer service rather than dismantling the seal.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination