Housekeeping · Washer maintenance

Front-load washer door seal: wipe, inspect and air-dry

After washing, wipe the door seal and glass and let moisture evaporate; check for trapped lint and debris.

AI-edited · Human admin approved

Wikimedia Commons · Gb.select / Wikimedia Commons, CC BY-SA 4.0; original image, no edits. Source: https://commons.wikimedia.org/wiki/File:Front_loader_Washing_machine.jpg · CC BY-SA 4.0 ↗

Water, lint and hair can remain in the folded gasket of a front-loading washing machine. LG advises wiping the gasket and door glass and letting the drum dry. Keep children and pets away from an open washer and follow the appliance's model-specific instructions.

Your try-it-at-home checklist

0 / 6 done

Remove the finished laundry and confirm the washer is off.
Visually check folds near the bottom of the door gasket for coins, lint and hair; never probe with a sharp tool.
Wipe the gasket folds and the inner door glass with a soft cloth. Do not stretch or tear the seal.
Let the drum and detergent drawer ventilate to dry. Supervise the area so children and pets cannot climb into the open washer.
Follow the model manual for tub-clean cycles and permitted cleaning agents; never mix bleach with vinegar or other cleaners.
If the seal is torn, leaks appear or mold persists, contact a qualified service provider instead of dismantling the machine.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination