Housekeeping · 욕실 수전 관리

Faucet water spots? Wipe gently and dry the finish instead of scrubbing

Evaporating water can leave mineral marks on faucet finishes. Use a soft damp cloth and then buff dry; avoid abrasives and bleach-based cleaners.

AI-edited · Human admin approved

Wikimedia Commons · Stilfehler / CC0 1.0 / Wikimedia Commons (https://commons.wikimedia.org/wiki/File:Bathroom_Faucet.jpg), unmodified original · Creative Commons CC0 1.0 Universal Public Domain Dedication ↗

Delta Faucet explains that water left to evaporate can deposit minerals and recommends a soft damp cloth followed by drying. Chemical compatibility varies by finish and manufacturer, so do not assume acids are safe on every tap.

Your try-it-at-home checklist

0 / 6 done

Check that the faucet is cool and consult care guidance for its finish and coating.
Lightly dampen a soft cloth with warm water and wipe away droplets and light marks.
Gently clean around the handle and base while keeping excess water out of seams and adjacent surfaces.
Immediately buff dry with a clean soft cloth, especially around joints where water collects.
Avoid steel wool, abrasives, bleach and aggressive acidic or alkaline cleaners. Do not assume vinegar suits every finish without checking its maker.
For persistent marks, identify the cleaner recommended for the exact faucet model and spot-test cautiously. Do not scrub a corroded or damaged finish.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination