Living items · 무선청소기 브러시 관리

Dyson Washable Soft-Roller Brush: 6 Steps and 24-Hour Drying

Wash only Dyson brush bars that your exact model permits washing; leave them fully dry for at least 24 hours. Keep end caps and non-washable heads dry.

AI-edited · Human admin approved

Dyson

Official Dyson washable brush-bar care and refitting instructions.

Link card to official source guidance

Open source ↗

Based on Dyson's instructions for washable brush bars; this does not mean that all Motorbar or Hair screw heads can be washed. Verify your exact model.

Your try-it-at-home checklist

0 / 6 done

1. Turn the vacuum off, disconnect it from the charger and confirm your exact brush bar is approved for washing.
2. Release the manufacturer-specified catch or end cap and remove the brush gently without forcing it.
3. Remove wrapped hair and thread; check the brush housing and air path for obstructions.
4. Rinse only the washable brush bar under running water. Keep end caps, motors and non-washable heads away from water.
5. Shake off moisture and stand the brush upright in a ventilated spot for at least 24 hours until fully dry.
6. Refit the bar and end cap in the directions shown by Dyson, ensure everything locks, and test operation.

Official Dyson washable brush-bar care and refitting instructions.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to clean, air-dry and store Hunter rubber rain boots

Six steps for safe Anker power-bank storage and charging

Six steps to clean, condition and store a Coach leather bag