Living items · 청소기 브러시 관리

Dyson Outsize soft roller: six steps for washing and 24-hour drying

Remove and wash only the washable soft roller bars; do not wash the end cap or main housing. Air-dry the bars for at least 24 hours before refitting.

AI-edited · Human admin approved

Dyson

Official Dyson Outsize washable brush-bar guide

Link card to Dyson original support guide

Open source ↗

Not every Dyson cleaner head is washable. These steps are based on Dyson's official Outsize Absolute soft-roller instructions. Check the guide for your exact cleaner head before washing any parts.

Your try-it-at-home checklist

0 / 6 done

1. Switch off the machine, let all moving parts stop, and detach the soft-roller cleaner head.
2. Unlock the cleaner-head fastener as instructed for the model and gently remove the brush bars.
3. Separate the end cap and set it aside. Do not wash the end cap or cleaner-head housing.
4. Rinse only the washable brush bars under running water, gently rubbing away lint. Do not add detergents or polishes.
5. Stand the bars upright and leave them to dry completely for a minimum of 24 hours. Never refit damp bars.
6. Reinsert the fully dry brush bars in their correct positions and secure the end cap. Power down again if rotation is abnormal.

Official Dyson Outsize washable brush-bar guide

Your try-it-at-home checklist

Further reading

You may also like

Six steps to clean, air-dry and store Hunter rubber rain boots

Six steps for safe Anker power-bank storage and charging

Six steps to clean, condition and store a Coach leather bag