Housekeeping · 청소기 관리

Dyson cordless vacuum filter: rinse without detergent and dry for 24+ hours

Dyson's cordless filter guidance explains monthly maintenance, water-only rinsing and complete drying. Removal methods vary by model.

AI-edited · Human admin approved

Wikimedia Commons · MattClayt / Wikimedia Commons / CC BY-SA 4.0. Unmodified. · CC BY-SA 4.0 ↗

A clogged filter can reduce suction or trigger pulsing. Dyson recommends approximately monthly cleaning for many cordless filter models, but always confirm that yours is washable. Never refit a damp filter.

Your try-it-at-home checklist

0 / 6 done

1. Turn the machine off and disconnect it from its charger. Identify the model and confirm that its filter is washable.
2. Remove the filter as instructed for that model, then gently tap loose dust into a bin.
3. For washable Dyson cordless filters, rinse by hand under cold tap water without detergent or abrasive cleaners.
4. Repeat until the water runs clear, then shake excess water out thoroughly.
5. Air-dry for at least 24 hours with good ventilation; wait longer if damp. Never use a dryer, microwave or direct heat.
6. Confirm the filter is fully dry to the touch before refitting as directed. Seek official support if suction issues remain.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination