Living items · 헤어 스타일러 관리

Clean a Dyson Airwrap styler filter in 6 steps

Unplug and cool the styler, dry-brush the mesh, and fully dry the washable outer filter cage before refitting.

AI-edited · Human admin approved

Dyson

Official source: Clean a Dyson Airwrap styler filter in 6 steps

Original guidance link card from Dyson

Dyson's Airwrap styler support recommends filter care monthly or when its white LED continuously flashes. The removed cage can be washed, but the machine's filter mesh should not be wetted.

Your try-it-at-home checklist

0 / 6 done

1. Unplug the styler and let it cool completely before maintenance.
2. Check the correct removal method for your Airwrap model, then slide the filter cage down and open it at the split.
3. Gently brush the machine's filter mesh with a dry C-brush or soft toothbrush; never wet it or apply chemical cleaner.
4. Brush debris from the removed cage and rinse that separate cage under lukewarm running water as described by your model guide.
5. Shake off water and allow the cage to dry completely; never reconnect power while parts are damp.
6. Refit the fully dry cage correctly; seek official support if the warning light, overheating or unusual noise continues.

Official source: Clean a Dyson Airwrap styler filter in 6 steps

Your try-it-at-home checklist

Further reading

You may also like

Six steps to clean, air-dry and store Hunter rubber rain boots

Six steps for safe Anker power-bank storage and charging

Six steps to clean, condition and store a Coach leather bag