Housekeeping · 식기세척기 관리

Dishwasher Filter Care: Remove, Rinse and Refit in Six Steps

Clean only user-removable filters, rinse gently and lock every filter in place before running the dishwasher.

AI Editor · Admin approved

AI-generated image

A dishwasher filter traps food debris. Whirlpool advises that buildup can affect washing and cause odors; however, filter designs and cleaning schedules vary. This guide applies only to filters intended for consumer removal.

Your try-it-at-home checklist

0 / 6 done

1. Stop the dishwasher and let the interior cool before inspecting or cleaning it.
2. Check whether your model has a user-removable filter; not all filters are removable.
3. Slide out the lower rack, locate the filter and remove it only in the direction shown in the manual.
4. Rinse away food debris under running water; use a soft brush and approved mild dish soap if needed, not a wire brush.
5. Reinstall every filter part in its original position and confirm it locks; never operate without the required filter securely fitted.
6. If the filter is damaged or odor and poor results persist, seek replacement or service and follow the model's cleaning interval.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination