Housekeeping · 계절 장식 안전

Six steps for safer seasonal string lights

Inspect rating, damaged wires and plugs; use outdoor-rated lights outside and turn them off before bed or leaving.

AI-edited · Human admin approved

U.S. CPSC

Original source: Six steps for safer seasonal string lights

Source guidance link card from U.S. CPSC

The CPSC warns that damaged sockets and wiring can cause shock or fire. US examples of plugs and protective outlets must be adapted to your local electrical codes.

Your try-it-at-home checklist

0 / 6 done

1. Check safety certification, voltage and indoor/outdoor rating before buying a light set.
2. Before each season, reject cracked sockets, frayed insulation and loose plugs or connections.
3. Use outdoor-certified lighting and appropriately protected outlets for outdoor installation, following local electrical rules.
4. Respect the manufacturer's maximum connected strings and cord ratings; do not pinch wires through doors or under rugs.
5. Use suitable hooks rather than piercing wires with nails or staples; keep away from heat and walkways.
6. Switch everything off before bed or leaving, unplug after the season and store without kinking or damaging the wire.

Original source: Six steps for safer seasonal string lights

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination