Organization · 책상 케이블 정리

Adhesive cord clips: prep the surface before organizing desk cables

Adhesive cord clips stick best to clean, dry, approved surfaces. Check the maker's installation instructions and route cables without excessive tension or sharp bends.

AI-edited · Human admin approved

3M Command

Official 3M Command 5-cord organizer product page

Text-only link card to the 3M cord organizer product; no verified preview image

Open source ↗

3M Command's 5-cord organizer is designed to route several cords on approved smooth surfaces. 3M stresses cleaning, firm pressure and the product's required waiting time. Cord clips are not substitutes for safely mounting power strips or outlets.

Your try-it-at-home checklist

0 / 6 done

Switch off equipment and disconnect plugs as needed, noting where each cable runs. Never continue using damaged electrical cords.
Check approved surfaces. 3M lists smooth painted walls, glass, metal and tile, while wallpaper and rough surfaces may be unsuitable.
Remove dust and grease. 3M recommends compatible rubbing alcohol and thorough drying before application; first check whether the surface finish tolerates it.
Install strips and clips exactly as the product package directs, pressing firmly for the prescribed time and allowing the specified cure/wait period.
Route cords with a little slack so connectors are not strained. Keep them away from chair wheels, hinges, heat, water and pinching doors.
Inspect periodically for loose adhesive or damaged insulation, and use the specific clip's removal instructions when relocating.

Official 3M Command 5-cord organizer product page

Your try-it-at-home checklist

Further reading

You may also like

Preserve family letters and paper records in six steps

Store household chemicals more safely in six steps

Six steps to store a sleeping bag without long-term compression