Housekeeping · 높은 곳 청소

Clean ceiling-fan blades in six steps with a pillowcase

Switch off the fan and gently trap dust with a pillowcase. Do not take risks reaching high fixtures; use safe access or a suitable extended duster.

AI-edited · Human admin approved

Hunter Fan describes sliding an old pillowcase over each blade to capture dust. Avoid excessive blade pressure or spraying the motor.

Your try-it-at-home checklist

0 / 6 done

1. Switch off the fan and light, and wait until blades stop and bulbs cool.
2. If you cannot safely reach the fan, use a suitable extension duster or professional help instead of taking risks on a ladder.
3. Where safely accessible, slide an old pillowcase over one blade and gently pull to catch dust inside.
4. Repeat on each blade without bending or forcing it. For greasy marks, apply a little mild cleaner to a cloth only.
5. Never spray liquid into the motor or lighting housing; dust exterior surfaces and allow them to dry.
6. Shake out and wash the pillowcase. If a blade looks bent or the fan wobbles abnormally after cleaning, stop use and have it checked.