Housekeeping · 카펫 얼룩 응급 관리

Fresh carpet spill: six steps to blot without scrubbing

When liquid spills on carpet, blot with a white cloth first. Test a small amount of cleaner in a hidden area; specialty fibers may need professional care.

AI-edited · Human admin approved

Carpet and Rug Institute

Original carpet-cleaning guidance from the Carpet and Rug Institute

Link card to CRI carpet spot care guide

Open source ↗

Rubbing a fresh spill can spread it or damage carpet fibers. This practical guide follows the Carpet and Rug Institute's care principles. Do not use it as a substitute for specialist treatment of silk, handmade rugs, large spills, or sewage-contaminated carpet.

Your try-it-at-home checklist

0 / 6 done

1. Identify the spill and check the carpet's care label. Use a professional for delicate, valuable, handmade or natural-fiber rugs.
2. Press a plain white absorbent cloth or unprinted paper towel gently onto the liquid. Never scrub or brush the fibers.
3. If there are semisolids, lift them carefully with a rounded spoon. Do not use an ordinary dry vacuum on wet spills.
4. Select a cleaner approved for the carpet material and pretest it in a hidden spot for color transfer or damage.
5. Put a little cleaner onto a white cloth and blot from the outer edge toward the center. Avoid soaking the carpet or rubbing forcefully.
6. Follow the product directions to remove residue with a little clean water, then blot dry. Call a professional if padding is soaked or the stain remains.

Original carpet-cleaning guidance from the Carpet and Rug Institute

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination