Housekeeping · 물병·빨대 세척

CamelBak eddy+ Bottle: 6 Steps to Clean the Bite Valve and Straw

The 25 oz Tritan Renew eddy+ body and cap are dishwasher-safe, but the bite valve and straw also need careful cleaning and reassembly.

AI-edited · Human admin approved

CamelBak

Official CamelBak care and cleaning guidance link.

Original CamelBak bottle care link

Open source ↗

CamelBak's care page describes warm soapy water or top-rack dishwashing for removable valves and straws and warns not to force brushes through the silicone slit. Confirm your model's design.

Your try-it-at-home checklist

0 / 6 done

1. Empty leftover drink, wash hands and unscrew the cap from the body.
2. Gently remove the straw and silicone bite valve where the model permits; never force non-removable parts.
3. Wash the bottle and detached parts with warm soapy water, flushing the straw thoroughly.
4. CamelBak permits dishwashing for eddy+ bodies and caps; place caps on the top rack and follow your item label.
5. Never force a sharp brush or tool through the bite-valve slit. Rinse away soap and air-dry the pieces.
6. Refit the bite valve in the correct orientation, seat the straw securely and check for leaks with clean water.

Official CamelBak care and cleaning guidance link.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination