Living items · 정수 필터 관리

Change a Brita Original white pitcher filter in 6 steps

Prepare, install and prime the white Original filter, then track its replacement interval.

AI-edited · Human admin approved

Brita

Official source: Change a Brita Original white pitcher filter in 6 steps

Link card to Brita source

This follows the official Brita Original (Standard) white filter guidance; it differs from the Elite blue filter in preparation and rated life.

0 / 6 done

1. Check that you have the white Brita Original (Standard) filter and a compatible pitcher.
2. Remove the filter and handwash the pitcher and lid with mild soap; rinse well and avoid the dishwasher.
3. Rinse the new white Original filter with cold water for 15 seconds; check extra instructions for older stock.
4. Align the filter and reservoir grooves and press firmly for a tight seal.
5. Use only cold, potable tap water. Discard the first three filtered pitchers or use that water for plants.
6. Set the reminder; replace after 40 gallons (about 151 L), roughly two months for typical use, sooner if needed.