Living items · 정수 주전자

Brita Denali with Elite Filter: 6 Setup and Maintenance Steps

The Brita Denali OB62's blue Elite cartridge is rated for about 120 gallons or six months. Discard the first three pitchers of filtered water or use it for plants.

AI-edited · Human admin approved

Brita

Official Brita Denali Elite original product guidance.

Original Brita filter instruction card

Open source ↗

This guide follows Brita US documentation for the Denali with Elite filter. The Elite interval differs from Original white filters (40 gallons/about two months); use only potable tap water.

Your try-it-at-home checklist

0 / 6 done

1. Confirm that the pitcher is Denali OB62 and the installed cartridge is the blue Elite; do not mix replacement schedules for other filters.
2. Wash hands, unwrap the filter and hand-wash pitcher parts with mild soap; rinse thoroughly. Do not use a dishwasher.
3. Align the Elite cartridge with its notch and push in to seal; Brita says it needs no pre-rinse.
4. Add cold potable tap water and discard the first three pitchers of filtered water or use it for plants.
5. Set the filter indicator to the Elite schedule, tracking date and usage; older indicators may not support it.
6. Replace Elite after about 120 gallons (454 L) or six months, sooner if conditions require; clean the pitcher regularly by hand.

Official Brita Denali Elite original product guidance.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to clean, air-dry and store Hunter rubber rain boots

Six steps for safe Anker power-bank storage and charging

Six steps to clean, condition and store a Coach leather bag