Living items · 디지털 기기 관리

Cleaning an Apple charging cable? Keep connectors dry and wait overnight

Apple recommends unplugging both ends, wiping the cable with a slightly damp lint-free cloth, keeping moisture away from connectors and allowing overnight drying.

AI-edited · Human admin approved

Wikimedia Commons · Logant547 / CC BY 4.0 / Wikimedia Commons: https://commons.wikimedia.org/wiki/File:USB-C_cable_connected_to_a_powerbank.jpg ; unmodified original · Creative Commons Attribution 4.0 International ↗

Spraying cleaners onto a dirty cable can carry liquid toward electrical connectors. Apple's own guide describes a cloth-only cleaning method and thorough drying for Apple and Beats cables; check other makers' instructions separately.

Your try-it-at-home checklist

0 / 6 done

Disconnect both ends of the cable from the device and power adapter before cleaning. Never work on a powered cable.
Inspect the covering for cracks, exposed wires or other damage. Stop using a damaged cable rather than trying to clean it back into service.
Use a soft, slightly damp, lint-free cloth to wipe along the cable. Keep the connectors and metal contacts completely away from moisture.
If dirt remains, Apple's instructions permit a soft lint-free cloth lightly dampened with soapy water to clean the length of the cable.
Wipe away any remaining soap or moisture with a dry cloth. Do not spray cleaners directly on the cable or submerge it.
Allow the cable to dry overnight before connecting it again. Check that both ends are completely dry.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to clean, air-dry and store Hunter rubber rain boots

Six steps for safe Anker power-bank storage and charging

Six steps to clean, condition and store a Coach leather bag