Housekeeping · 창문 관리

Clean Insect Screens Gently: Six Steps Based on Andersen's Guidance

Based on Andersen's official guidance, clean screen mesh and frames with mild soapy water and a soft brush. Never risk a fall to reach a high window.

AI-edited · Human admin approved

Wikimedia Commons · Photograph: Maniago / Wikimedia Commons; released to public domain by the author; unchanged. · Public domain (author dedication; PD-self) ↗

Insect screens collect dust and pollen. Andersen advises mild soap, fresh water, and soft brushes for mesh and frame maintenance. This guide is for safely accessible screens; removal procedures vary by product. Do not lean outside or remove a screen over a drop.

Your try-it-at-home checklist

0 / 6 done

1. Check where the screen is installed. If reaching it risks a fall, do not lean outside or remove it yourself; seek qualified assistance for high or inaccessible windows.
2. Gather a soft cloth, soft-bristle brush, mild soapy water, and fresh water. Avoid harsh abrasives or aggressive cleaners that could damage mesh and frames.
3. Gently brush safely accessible mesh with mild soapy water. Do not press hard enough to stretch the screen or dislodge it from the frame.
4. Rinse thoroughly with fresh water if the screen can be safely removed according to its maker's directions. If cleaning in place, protect nearby walls and electrical items from water.
5. Clean the frame with the same mild soap and a soft brush, rinse with clean water, then dry the frame completely with a soft cloth.
6. Check for torn mesh and loose fastenings. Andersen recommends cleaning at least yearly, or approximately every three months where airborne dirt, smoke, or salt exposure is high.

Your try-it-at-home checklist

Further reading

You may also like

Six steps to rotate—not flip—a Sealy Posturepedic mattress

Six steps to clean Andersen sliding patio-door tracks and rollers

Six steps to reduce kitchen-sponge cross-contamination