Organization · 케이블 정리

Six Steps for 3M Command Cord Clips: Plan, Stick and Route Safely

Organize loose desk cables with clear Command cord clips while checking surfaces, adhesive curing time and cord damage.

AI-edited · Human admin approved

3M Command

Text-only link to 3M's official Command Clear Round Cord Clips product information.

Official 3M Command clear cord clip information link

Routing cables to avoid pinching and tripping matters more than hiding them. This guide uses the official 3M Command Clear Round Cord Clips (17017 family) information and US OSHA warnings about cable damage. Always check your own package for model-specific adhesive instructions.

Your try-it-at-home checklist

0 / 6 done

1. Safely switch off and unplug equipment before moving its cables. Inspect jackets and plugs for cracks, pinches or discoloration. Replace or have damaged cords assessed rather than covering damage with tape.
2. Plan a short route along a wall or behind the desk with enough slack. Avoid doors, walkways, heat and splash zones. Never conceal power cords under carpets or heavy furniture.
3. Check the mounting surface. 3M recommends smooth, sound indoor surfaces and cautions against wallpaper, delicate finishes and some windows or vinyl surfaces. Test for finish sensitivity first.
4. Prepare the surface as the manufacturer directs. Do not spray liquids near outlets or equipment. Let the mounting area dry completely and use the correct supplied adhesive strip.
5. Press and attach the strip and clip following the instructions, then wait before loading it with a cable. The checked 3M round cord clip information advises one hour after application.
6. Leave cable slack rather than pulling or sharply bending it. Recheck adhesion and the cord jacket periodically. To remove the clip, stretch the release tab slowly downward along the wall instead of pulling it straight out.

3MCommand Clear Round Cord Clips ↗Official 3M product information for 17017 family, marketed for managing loose cables indoors; no nails or tools required. Do not imply professional electrical wiring use.3MCommand Round Cord Clip 17017CLR-4-SPIG ↗3M regional official specification includes waiting one hour after application; warns against wallpaper, vinyl, weak surfaces and windows. Exact instructions can vary by market/package.3M Korea코맨드 테이프와 훅을 부착하고 떼어내는 방법 ↗Manufacturer regional how-to page; removal by controlled stretch-release, avoid applying unsuitable tapes to weak surfaces.US Occupational Safety and Health AdministrationElectrical - Flexible Cords ↗OSHA warns that cords can be damaged at door edges and by abrasion, pinch or strain; do not rely on clips to repair unsafe cords.Office of Congressional Workplace RightsDamaged Power Cords ↗Official safety note on damaged cords under furniture and the need to remove defective cables from service.

Text-only link to 3M's official Command Clear Round Cord Clips product information.

Your try-it-at-home checklist

Further reading

You may also like

Preserve family letters and paper records in six steps

Store household chemicals more safely in six steps

Six steps to store a sleeping bag without long-term compression